Vibrator Controllers CUH
SDVC34-XLR6.0A
Features
- Auto FM : Automatic output frequency modulation in real time to ensure the vibratory feeder will always work. at its best vibration frequency.
- Auto Constant Speed Control : Automatic output voltage adjustment in real time to ensure constant preset feed speed regardless of weight change of the feed material in the vibratory feeder.
- Auto Frequency Measuring : Automatically measure and output the best vibration frequency of the vibratory feeder.
- Automatic Voltage Regulation : Eliminate both feed speed variation caused by mains voltage fluctuation and beat effect caused by industrial AC frequency.
- Sync Output Waveforms : Sync output waveform of the slave controller with that of the master controller to the same frequency and phase to avoid beat effect.
- Remote ON/OFF Control : The controller has 2 groups of ON/OFF control ports. Switch sensor or PLC can be connected to them to turn on/off the controller.
- Automatic Switch Sensor Type Recognition : The controller can recognize and adapt to both NPN and PNP type switch sensors.
- Soft Startup : In order to avoid sudden shock to the feed material and vibratory feeder, the controller can gently increase output voltage/ feed speed from 0 to the preset value when startup.
- Preset Speeds : 4 preset feed speeds can be stored and output by external short -circuit signal.
- Max Adjustable Output Voltage : Max Adjustable Output Voltage can be preset to protect the vibratory feeder from damage caused by high vottage.
- Remote Speed Control : Output Voltage/Feed Speed of the controller can be adjusted remotely by an external potentiometer, a PLC, or a 1路5V/4-20mA DC signal.
- 24V DC Control Output : The controller can output 24V DC power associated with logical relation setting of the ON/OFF Control to drive a solenoid, an electrical relay or other external devices.
- RS485 Communication : All parameters of the controller can be adjusted via RS485 communication ports (for SDVC34-MJ & SDVC34-MRJ)
- Counting : Count number of the feed material. The controller will stow down or stop feeding when count up to preset value. (for SDVC34-MR & SDVC34-MRJ)
Dimensions : 190*147. 8*94.5(L*W*H, mm)
Weight : SDVC34- XL:1930g(without accessory)
Optional Accessorie :
Intelligent Photoelectric Sensor (1.2m)
Standard Accessory : Vibration Sensor (16G, 1.2m)
Optional Accessories : Vibration Sensor (35G, 1.2m)
Optional Accessories Vibration Sensor (50G, 1.2m)
Optional Accessories Vibration Sensor (70G, 1.2m)
Technical Specifications
ITEM |
Range |
Unit |
Description |
|
Min |
Max |
|||
| Input voltage | 85 |
260 |
V |
AC RMS Value |
| Output voltage | 0 |
260 |
V |
Less than 150% Input voltage |
| Output Current | 0
|
6
|
A
|
SDVC34-XL SDVC34-XLR |
SDVC34-XLJ SDVC34-XLRJ |
||||
| Output Frequency | 40 |
400 |
Hz |
|
| OutPut Power | 0 |
1320 |
VA |
SDVC34-XL SDVC34-XLR SDVC34-XLJ SDVC34-XLRJ |
| Output Waveform | Sine |
|||
| Voltage adjustmen Accuracy | 1 |
V |
||
| Frequency Adjustment Accuracy | 0.1 |
Hz |
||
| ON/OFF delay | 0 |
20 |
s |
|
| ON/OFF Delay Accuracy | 0.1 |
s |
||
| Soft Startup Time | 0 |
10 |
s |
|
| DC Control output Voltage | 22 |
26 |
V |
DC output associated with ON/OFF control |
| DC Control output current | 0 |
200 |
mA |
|
| Stand by Power Consumption | 1.5 |
3 |
w |
|
| Display Method | 5 |
Digit |
LED Digital Tube |
|
Control Method |
1-5 |
V |
Remote Speed Control Voltage |
|
Standard TTL Electric Level |
Switching Signal |
|||
/ |
6 Buttons + LED screen |
|||
| Work Space Temperature |
-10 |
60 |
°C |
Non-Condensing |
| Work Space Humidity | 10 |
85 |
% |
|