Vibrator Controllers CUH
SDVC22-S:5A
Features
- Automatic Voltage Regulation : Eliminate feed speed variation caused by mains voltage fluctuation.
- Soft Startup : in order to avoid sudden shock to the feed material end vibratory feeder. the controller can gently increase output voltage from 0 to the preset value when startup.
- Preset Speeds : 4 preset feed speeds can be stored and output by external short-circuit signal.
- Remote ON/OFF Control : Each stde of the conttoller has 2 groups of ON/OFF control pins. Switch sensor or PLC can be connected to them to turn on/off the controller.
- Photoelectric ON/OFF Control : The CUH Intelligent Photoelectric Sensor can be connected to tum on/off the controller.
- Remote Speed Control : Output Voltage of the controller can be adjusted remotely by an external polentiometer, a PLC. or a 1-5V DC signal.
- DC Control Output : The controller can output low voltage DC power associated with logical relation setting of the ON/OFF Control to drive a solenoid. an electrical relay or other external devices.
- Overheat Protection : if internal temperature of the controller gets too high. the conttoller will stop its output to protect itself.
- Over current Protection : If output current exceeds its rated value by misoperation.the controller will stop its output to protect the controller and vibratory feeder.
- hort -Circuit Protection : If output of the controller is short-circuited, the fuse inside the controller will be blown to protect the controller and vibratory feeder from further damage.
Dimensions : 130*106*57.5(L*W*H, mm)
Weight : 500g(without accessory)
Optional Accessorie :
Intelligent Photoelectric
Sensor (1.2m)
Technical Specifications
ITEM |
Range |
Unit |
Description |
|
Min |
Max |
|||
| Input voltage | 85 |
260 |
V |
AC RMS Value |
| Output voltage | 0 |
260 |
V |
Less than Input voltage |
| Output Current | 0 |
5 |
A |
|
| Output Frequency | 50/100 |
Hz |
Mains Frequency is 50Hz |
|
60/120 |
Hz |
Mains Frequency is 60Hz |
||
| OutPut Power | 0 |
1100 |
VA |
|
| Output Waveform | Tangent Sine |
|||
| Viltage Adjestment Accuracy | 1 |
v |
||
| ON/OFF delay | 0 |
20 |
s |
|
| ON/OFF Delay Accuracy | 0.1 |
s |
||
| Soft Startup Time | 0 |
10 |
s |
|
| DC Control output Voltage | 22 |
26 |
V |
DC output associated with ON/OFF control |
| DC Control output current | 0 |
200 |
mA |
|
| Stand by Power Consumption | 1.5 |
3 |
w |
|
| Display Method | 8 |
Digit |
LED Digital Tube |
|
Control Method |
1-5 |
V |
Remote Speed Control Voltage |
|
Standard TTL Electric Level |
Switching Signal |
|||
/ |
8 Buttons + 2LED screens |
|||
| Work Space Temperature |
-10 |
60 |
°C |
Non-Condensing |
| Work Space Humidity | 10 |
85 |
% |
|